Vertical axis shredder Alamo Industrial EKII 2005 in Sandusky, Ohio For Sale

Construction Handling-lifting Vehicles-trucks Forestry Turf Farming
Vertical axis shredder - Criterias (Ref. : 28-xxxx7G) Alamo Industrial EKII
Make :
Alamo Industrial
Model :
EKII
Year :
xxxx
Working width :
0 m
Condition :
/
Availability :
/
Price excl. taxes :
5,000 USD
Location :
USA (Ohio)
Comments :
The EXTEN-A-KUT II mounts to the tractor using the CAT II three-point hitch. A tractor size of 60-HP is recommended. A smaller tractor with 45-HP may used, however ample front-end counterweight will be required. The EXTEN-A-KUT® II offset mower is designed for cutting grass, weeds, and brush up to 1? in diameter along road-sides, ditch-banks, and other hard-to-reach areas including pond and creek banks. The hydraulically-powered arm can extend the mowing head out 12-feet, 6-inches from the tractor center-line. Being hydarulically-driven, there are no mechanical drive-lines, belts, pulleys, U-joints, or complicated drives. The hydraulic system is powered by a gear pump operating at 39-gallons-per-minute at 540 PTO, which will provide the power you need in tough mowing situations. The operating range of the cutting head is 85-degrees up and 70-degrees down allowing the operator to mow in many different circumstances that are impossible with ordinary mowers. Counterweight is provided with a 60-gallon hydraulic reservoir tank. The large hydraulic oil tank will also permit the system to run cooler in rough mowing conditions. Recommended tractor size is 60-HP, however a 45-HP tractor may be used with ample front-end counterweight. Serial Number : EKII-xxxx6, Attachment ID : 7ADC9A2A-CC31-E311-xxxx-5CF3FC7AA6E0,
Alamo Industrial EKII
Services
Have this equipment delivered
Have your equipment appraised